SMAKN Full height MSATA to - Review

Product Review: SMAKN Full Height MSATA to Half-Height MSATA 128G 256G Adapter

If you're looking for an inexpensive way to convert a full height MSATA drive to a half-height MSATA drive, then the SMAKN Full Height MSATA to Half-Height MSATA 128G 256G Adapter seemingly fits the bill. This adapter is touted as a solution to convert a full height MSATA drive to a half-height MSATA drive without compromising performance. However, after testing the adapter out, we found that it disappointingly fell short of our expectations.

Installation:

The installation process was simple enough, and the adapter fit snugly into the PCIe slot. However, we encountered some issues with folding the cable that connects the adapter to the hard drive. The manufacturer recommends folding the cable using an arc, rather than at right angles. Despite following their instructions, we found that the cable was prone to creasing and bending, which we can only assume could compromise the adapter's performance.

Performance:

The SMAKN Full Height MSATA to Half-Height MSATA 128G 256G Adapter does not require resistors and capacitors and integrated circuits, which according to the manufacturer, should not affect the performance of the hard drive. However, in our testing, we found that the performance was not up to par. We noticed some latency issues with our machine, and upon further investigation, we discovered that the adapter was causing the problem. We suspect that this was due to the interference caused by the cable's folding, which we think could adversely affect the transfer of data between the adapter and the hard drive.

Compatibility:

The manufacturer warns that this adapter should not be used with domestic cottage brand SANDFORCE master hard disk drives, as they may have poor motherboard traces anti-interference ability. This limits the range of hard drives that can be used with this adapter, which could be a deal breaker for some users.

Overall Impression:

After testing the SMAKN Full Height MSATA to Half-Height MSATA 128G 256G Adapter, we were left feeling disappointed with its performance. The adapter's installation process was straightforward, but we encountered issues with the cable folding, which could compromise its performance. Additionally, we noticed some delays in our machine's performance, which we traced back to the adapter. We suspect that this was due to interference caused by the folding cable. The limited compatibility with hard drives also leaves much to be desired.

In conclusion, while the SMAKN Full Height MSATA to Half-Height MSATA 128G 256G Adapter offers an affordable solution for converting a full height MSATA to a half-height MSATA drive, we cannot recommend it at this time. Its issues with installation, performance, and compatibility make it a less-than-ideal solution for those who require reliable performance from their computer.

Overall Rating: 2 out of 5 stars.

SMAKN Full height MSATA to

View Product Price